Materials & Tools You’ll Need:
New upholstery material (leather, faux leather,velvet, boucle or linen)

Staple gun with staples

Upholstery foam (if the old foam is worn out)

Batting (optional, for extra cushioning)

Scissors or utility knife

Flathead screwdriver or staple remover

Measuring tape

Screwdriver or drill (to remove legs/hardware if needed)

Spray adhesive (optional)

Step-by-Step Instructions:
1. Remove the Old Upholstery
Open the ottoman and unscrew or detach any legs or hardware.

Use a flathead screwdriver or staple remover to pull out the staples holding the old leather.

Remove the fabric carefully to avoid damaging the wood structure underneath.

2. Inspect and Replace Foam (if needed)
If the foam is damaged or compressed, remove it.

Cut new foam to size and secure it to the ottoman with spray adhesive.

Add batting over the foam for a smoother, softer finish (optional).

3. Measure and Cut New Upholstery
Measure each side of the ottoman, adding 2–4 inches extra on each edge to wrap around and staple underneath.

Cut your new material accordingly.

4. Attach New Upholstery
Start with one side: pull the fabric tightly over the edge and staple it underneath, starting in the center and working out toward the corners.

Repeat for the opposite side, keeping the material tight and smooth.

Tuck the corners neatly and staple securely.

5. Reassemble the Ottoman
Trim excess fabric if needed.

Reattach any legs, hinges, or hardware.

Clean and smooth out any wrinkles in the material.
Tips:
Use upholstery-grade materials for durability.

For leather, keep it taut to avoid wrinkles but don’t overstretch—it can tear.

Consider adding decorative nailhead trim or buttons for a professional touch.